![1234.jpg](https://steemitimages.com/DQmdYvjHWeR9WrDcd9adpVf7eJ9GUxDfFVe5mQe4reukdFN/1234.jpg) ## Halka Obje Çizme: ------ İç veya dış çağı belli olan içi dolu veya boş olarak cisim oluşturmaya yarar. Bu komut çizilen objenin iç ve dış çağı arasında kalan bölge dolgu halinde olacaktır. Bu komutu nasıl kullanacağınız aşağıdaki örnekte gösterilmiştir. <div class='pull-left'> **Örnek 1:** **1- Komut satırına: Donut → Enter** **2- İnside diameter <0.50>:35 → Enter** **3- Outside diameter <1.00>: 45 → Enter** **4- Center of doughnut: 60,60 → Enter** </div> <div class='pull-right'> **Örnek 2:** **1- Komut satırına: Donut → Enter** **2- İnside diameter <0.50>:0 → Enter** **3- Outside diameter <1.00>: 45 → Enter** **4- Center of doughnut: 130,60 → Enter** </div> ![2018-04-18 23-32-59.gif](https://steemitimages.com/DQmPnX3KdispHMyGzSeDSUAQPoBqeGrQyQ6mNcKaqXb23eQ/2018-04-18%2023-32-59.gif) ------ ## Yay(Arc) Çizme: ------ Birbirinden bağımsız yay parçaları veya tek bir yay parçası çizmeye yarayan komuttur. Bir yaya ait değişkenler şöyle sıralanmıştır. Kullanmak için komut satırına **arc → enter** yapmak yeterli olacaktır. **1-** Yayın kapsadığı açı, yayın merkezi ve yay krişinin uzunluğu **2-** Yay yarıçapı, yayın başlanğıç noktası ve yayın bitiş noktası **3-**Yay üzerinde bir nokta ve yay uç noktasına göre yay'ın yönelimi **1- 3 Nokta Yöntemi(3 Points):** ------ Bu yöntemle yay çizilirken çizim alanında birbirinden bağımsız üç ayrı koordinat noktası belirlenir. Böylece yay bu iç noktadan geçerek çizilmiş olacaktır. Komutun kullanımı aşağıdaki verilen örnekte gösterilmiştir. **Örnek:** **1- Komut satırına: Arc → Enter** **2- Specify start point of arc or [Center]: 140,120 → Enter** **3- Specify second point of arc or [Center/End]: 120,150 → Enter** **4- Specify end point of arc: 120,90 → Enter** ![2018-04-18 23-49-00.gif](https://steemitimages.com/DQmeyo8nNLChvVHhYRLqE7j7FGdGaZVk8xkKYdwZvtN8JJ7/2018-04-18%2023-49-00.gif) **2- SCE Yöntemi:** ------ Bu yöntemle yay çizilirken çizim alanında yayın başlanğıç noktası yay ait merkez ve yayın bitiş noktasının koordinatları belirlenir. Böylece yay bu koordinat noktasından geçerek çizilmiş olacaktır. Yöntemin kullanımı aşağıdaki örnekte gösterilmiştir. **Örnek:** **1- Komut satırına:: Arc → Enter** **2- Specify start point of arc or [Center]: 150,140 → Enter** **3- Specify second point of arc or [Center/End]: CE → Enter** **4- Specify center point of arc: 105,140 → Enter** **5- Specify end point of arc or [Angle/Chord Length]: 60,140 → Enter** ![2018-04-18 23-49-00.gif](https://steemitimages.com/DQmRnVeg9sfB55FP1LEFtVP5igczFjTtHdSVjfNWETohQaX/2018-04-18%2023-49-00.gif) **3- SCA Yöntemi:** ------ Bu yöntemle yay çizilirken çizim alanında yayın başlanğıç noktası yay ait merkez ve yayın kapsadığı açı belirlenmiş olur. Böylece yay bu **SCA** yöntemi kullanılarak çizilmiş olunur. Komutun kullanımı aşağıdaki örnekte gösterilmiştir. **Örnek:** **1- Komut satırına: Arc → Enter** **2- Specify start point of arc or [Center]: 210,110 → Enter** **3- Specify second point of arc or [Center/End]: CE → Enter** **4- Specify center point of arc: 110,110 → Enter** **5- Specify end point of arc or [Angle/Chord Length]: A → Enter** **6- Specify included angle: 135 → Enter** ![2018-04-18 23-49-00.gif](https://steemitimages.com/DQmfBf5f4J15vmUFzB6U9yGQQXArKm3oDNREo7KRX9SZB6U/2018-04-18%2023-49-00.gif) **4- SCL Yöntemi:** ------ Bu yöntemle yay çizilirken çizim alanında yayın başlanğıç noktası yaya ait merkez ve kriş uzunluğu belirlenmiş olur. Böylece yay bu **SCL** yöntemi kullanılarak çizilmiş olunur. Komutun kullanımı aşağıdaki örnekte gösterilmiştir. **Örnek:** **1- Komut satırına: Arc → Enter** **2- Specify start point of arc or [Center]: 210,110 → Enter** **3- Specify second point of arc or [Center/End]: CE → Enter** **4- Specify center point of arc: 110,110 → Enter** **5- Specify end point of arc or [Angle/Chord Length]: A → Enter** **6- Specify included angle: 151.5 → Enter** ![2018-04-18 23-49-00.gif](https://steemitimages.com/DQmVkditSWyKaxF5WR7mEqDrnfpyLmFbG1rTFXi1rtrp6td/2018-04-18%2023-49-00.gif) **Not:**En sonda **CTRL**'ye basılı tutarak enterlarsanız tam zıttı yönde yayı yapacaktır **5- SER Yöntemi:** ------ Bu yöntemle yay çizilirken çizim alanında yayın başlanğıç noktası bitiş noktası veya yayın yarıçapı belirlenmiş olur. Böylece yay **SER** yöntemi kullanılarak çizilmiş olur. Komutun kullanımı aşağıdaki örnekte gösterilmiştir. **Örnek:** **1- Komut satırına: Arc → Enter** **2- Specify start point of arc or [Center]: 210,110 → Enter** **3- Specify second point of arc or [Center/End]: EN → Enter** **4- Specify center point of arc: 110,210 → Enter** **5- Specify end point of arc or [Angle/Chord Length]: R → Enter** **6- Specify included angle: 100 → Enter** ![2018-04-18 23-49-00.gif](https://steemitimages.com/DQmYdW7wgnZKELUZ9M4xci6BzotZ197W9BsGuqjBH26nuhm/2018-04-18%2023-49-00.gif) **Not:**En sonda **CTRL**'ye basılı tutarak enterlarsanız tam zıttı yönde yayı yapacaktır **6- SEA Yöntemi:** ------ Bu yöntemle yay çizilirken çizim alanında yayın başlanğıç noktası yayın bitiş noktası ve yayın merkez açısı verilmiş olur. Böylece yay **SEA** yöntemi kullanılarak çizilmiş olur. Komutun kullanımı aşağıdaki örnekte gösterilmiştir. **Örnek:** **1- Komut satırına: Arc → Enter** **2- Specify start point of arc or [Center]: 210,110 → Enter** **3- Specify second point of arc or [Center/End]: EN → Enter** **4- Specify center point of arc: 110,210 → Enter** **5- Specify end point of arc or [Angle/Chord Length]: A → Enter** **6- Specify included angle: 90 veya -90 → Enter** ![2018-04-18 23-49-00.gif](https://steemitimages.com/DQmYDfdYZZJSdWXnzckvLma9X9ydrb1GWFUcs7o1jR2DZT1/2018-04-18%2023-49-00.gif) **Not:**En sonda **CTRL**'ye basılı tutarak enterlarsanız tam zıttı yönde yayı yapacaktır. **7- SED Yöntemi:** ------ Bu yöntemle yay çizilirken çizim alanında yayın başlanğıç noktası bitiş noktası ve yayın çapı belirlenmiş olur. Böylece yay **SED** yöntemi kullanılarak çizilmiş olunur. Komutun kullanımı aşağıdaki örnekte gösterilmiştir. **Örnek:** **1- Komut satırına: Arc → Enter** **2- Specify start point of arc or [Center]: 110,110 → Enter** **3- Specify second point of arc or [Center/End]: EN → Enter** **4- Specify end point of arc: 60,160 → Enter** **5- Specify center point of arc or [Angle/Chord Length]: D → Enter** **6- Specify tangent direction for the start point or arc: 90 → Enter** ![2018-04-18 23-49-00.gif](https://steemitimages.com/DQmSaF1YSWKg9jWhoFYGEGaf3dvrqLAYnHhGxwr7XZn2Kxf/2018-04-18%2023-49-00.gif) **Not:**En sonda **CTRL**'ye basılı tutarak enterlarsanız tam zıttı yönde yayı yapacaktır **8- Continue Yöntemi:** ------ Herhangi bir yay çiziminden sonra yay çizimine devam edebilecek ise; **Arc** komutunun ilk iletisine **Enter**'la cevap verilmeli bu şekilde girilen son nokta hazırlanarak yay çizimine devam edilir. Komutun kullanımı aşağıdaki örnekte gösterilmiştir. **Örnek:** **1- Komut satırına: Arc → Enter** **2- Specify start point of arc or [Center]: → Enter** **3- Specify second point of arc or [Center/End]: 120,110 → Enter** **4- Specify end point of arc: → Enter** ![2018-04-18 23-49-00.gif](https://steemitimages.com/DQmein5BhebeJ6x9tod4rnzSfMzAGoqk9Vvuqdup9E751uY/2018-04-18%2023-49-00.gif) **Not:** En sonda **CTRL**'ye basılı tutarak enterlarsanız tam zıttı yönde yayı yapacaktır. ------ <center><p> ***Okuduğunuz için hepinize teşekkür ederim...*** ***Desteklerinizi Eksik Etmeyin!*** ***Yorum ve Görüşlerinizi Lütfen Yazınız.*** ***Herkese Hayırlı ve Bol Kazançlar.*** ***İyi Günler Dilerim.*** </center> [Resim](https://redstack.com.au/support/blog_posts/cad-software/autocad-and-autocad-lt-2018-1-updates-now-available) ![DQmU3efnwJZ9mbK28w66C8uKbLmSx3p25aAaEeXfoXVHKGC.png](https://steemitimages.com/DQmU3efnwJZ9mbK28w66C8uKbLmSx3p25aAaEeXfoXVHKGC/DQmU3efnwJZ9mbK28w66C8uKbLmSx3p25aAaEeXfoXVHKGC.png) ###### Copyright © Dangerux 2017.Tüm Hakları Saklıdır. ---------- Posted on [coogger.com](http://www.coogger.com/@dangerux/autocad-temel-cizim-komutlar-4) - The platform that rewards information sharing ----------
post_id | 44,261,969 |
---|---|
author | dangerux |
permlink | autocad-temel-cizim-komutlar-4 |
category | coogger |
json_metadata | "{"community": "coogger", "tags": ["coogger", "tr", "autocad", "education", "steemit"], "format": "markdown", "app": "coogger/1.3.0", "mod": {"user": "hakancelik", "approved": "tutorial-content", "cooggerup": true, "cantapproved": null}, "content": {"content_list": "autocad", "status": "approved", "dor": "6.0"}}" |
created | 2018-04-18 21:31:36 |
last_update | 2018-04-24 21:47:36 |
depth | 0 |
children | 7 |
net_rshares | 797,428,590,263 |
last_payout | 2018-04-25 21:31:36 |
cashout_time | 1969-12-31 23:59:59 |
total_payout_value | 3.419 SBD |
curator_payout_value | 0.818 SBD |
pending_payout_value | 0.000 SBD |
promoted | 0.000 SBD |
body_length | 8,351 |
author_reputation | 3,186,642,421,786 |
root_title | "Temel Çizim Komutları - DONUT, ARC(YAY)" |
beneficiaries | [] |
max_accepted_payout | 1,000,000.000 SBD |
percent_steem_dollars | 10,000 |
author_curate_reward | "" |
voter | weight | wgt% | rshares | pct | time |
---|---|---|---|---|---|
ubg | 0 | 305,334,630 | 1% | ||
cheetah | 0 | 2,074,388,522 | 0.08% | ||
fetch | 0 | 15,131,265,474 | 100% | ||
wuhotan | 0 | 6,602,028,645 | 1.52% | ||
nanocheeze | 0 | 62,721,770 | 2% | ||
emrebeyler | 0 | 9,333,797,328 | 1% | ||
dangerux | 0 | 1,616,966,324 | 100% | ||
whiterabb1t | 0 | 699,036,574 | 16% | ||
msp-bidbot | 0 | 62,842,663,622 | 6.45% | ||
sauronbey | 0 | 383,364,107 | 9.6% | ||
ucmuharfli | 0 | 188,366,981 | 5% | ||
gulumserunver | 0 | 70,333,568 | 12.8% | ||
minnowvotes | 0 | 42,293,848,951 | 3.18% | ||
queqtra | 0 | 3,649,510,227 | 100% | ||
gcamkerten | 0 | 202,842,945 | 16% | ||
passive | 0 | 20,841,946,262 | 100% | ||
ruen | 0 | 299,370,745 | 25% | ||
murti | 0 | 279,324,504 | 50% | ||
hakancelik | 0 | 9,244,571,585 | 100% | ||
muratkbesiroglu | 0 | 7,659,285,956 | 3% | ||
mesutkrgln | 0 | 50,296,950 | 16% | ||
kemalyokus | 0 | 132,392,806 | 16% | ||
onlyblack | 0 | 249,288,651 | 100% | ||
highmech | 0 | 4,011,688,783 | 100% | ||
inciter | 0 | 115,282,366,499 | 4.76% | ||
ulqu3 | 0 | 183,820,450 | 10% | ||
therising | 0 | 399,559,001,275 | 1.5% | ||
firster78 | 0 | 137,906,019 | 22.4% | ||
coogger | 0 | 16,751,224,313 | 100% | ||
gemplaymaker | 0 | 174,987,479 | 16% | ||
jumbot | 0 | 72,505,662,691 | 32% | ||
happyheart | 0 | 61,278,863 | 9.6% | ||
tucuxi | 0 | 3,133,940,389 | 100% | ||
alisari | 0 | 96,845,278 | 16% | ||
postdestek | 0 | 613,344,171 | 100% | ||
airdroptr1 | 0 | 158,927,942 | 50% | ||
qwerty09 | 0 | 467,873,449 | 100% | ||
tahirozgen | 0 | 76,775,535 | 16% |
This post has received a 6.45% upvote from @msp-bidbot thanks to: @dangerux. Delegate SP to this public bot and get paid daily: [50SP](https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=msp-bidbot&vesting_shares=102530.111111%20VESTS), [100SP](https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=msp-bidbot&vesting_shares=205244.111111%20VESTS), [250SP](https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=msp-bidbot&vesting_shares=515000.000000%20VESTS), [500SP](https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=msp-bidbot&vesting_shares=1029244.000000%20VESTS), [1000SP](https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=msp-bidbot&vesting_shares=2059244.000000%20VESTS), [5000SP](https://v2.steemconnect.com/sign/delegateVestingShares?delegator=&delegatee=msp-bidbot&vesting_shares=10289244.000000%20VESTS) Don't delegate so much that you have less than 50SP left on your account.
post_id | 44,263,706 |
---|---|
author | msp-bidbot |
permlink | re-dangerux-autocad-temel-cizim-komutlar-4-20180418t214946780z |
category | coogger |
json_metadata | "{"app": "postpromoter/1.8.0"}" |
created | 2018-04-18 21:49:54 |
last_update | 2018-04-18 21:49:54 |
depth | 1 |
children | 0 |
net_rshares | 0 |
last_payout | 2018-04-25 21:49:54 |
cashout_time | 1969-12-31 23:59:59 |
total_payout_value | 0.000 SBD |
curator_payout_value | 0.000 SBD |
pending_payout_value | 0.000 SBD |
promoted | 0.000 SBD |
body_length | 1,057 |
author_reputation | -19,850,789,211 |
root_title | "Temel Çizim Komutları - DONUT, ARC(YAY)" |
beneficiaries | [] |
max_accepted_payout | 1,000,000.000 SBD |
percent_steem_dollars | 10,000 |
You got a 3.18% upvote from @minnowvotes courtesy of @dangerux!
post_id | 44,264,038 |
---|---|
author | minnowvotes |
permlink | re-dangerux-autocad-temel-cizim-komutlar-4-20180418t215323026z |
category | coogger |
json_metadata | "{"app": "postpromoter/1.9.3"}" |
created | 2018-04-18 21:53:24 |
last_update | 2018-04-18 21:53:24 |
depth | 1 |
children | 0 |
net_rshares | 0 |
last_payout | 2018-04-25 21:53:24 |
cashout_time | 1969-12-31 23:59:59 |
total_payout_value | 0.000 SBD |
curator_payout_value | 0.000 SBD |
pending_payout_value | 0.000 SBD |
promoted | 0.000 SBD |
body_length | 64 |
author_reputation | -300,453,853,020 |
root_title | "Temel Çizim Komutları - DONUT, ARC(YAY)" |
beneficiaries | [] |
max_accepted_payout | 1,000,000.000 SBD |
percent_steem_dollars | 10,000 |
Congratulations, your contribution has been approved. - Your contribution type tutorial content ------ You can contact us on [discord](https://discord.gg/q2rRY8Q). [coogger-moderator](https://steemit.com/@hakancelik)
post_id | 44,265,390 |
---|---|
author | hakancelik |
permlink | re-autocad-temel-cizim-komutlar-4-20180418t220710 |
category | coogger |
json_metadata | {} |
created | 2018-04-18 22:07:12 |
last_update | 2018-04-18 22:07:12 |
depth | 1 |
children | 0 |
net_rshares | 21,036,782,659 |
last_payout | 2018-04-25 22:07:12 |
cashout_time | 1969-12-31 23:59:59 |
total_payout_value | 0.087 SBD |
curator_payout_value | 0.022 SBD |
pending_payout_value | 0.000 SBD |
promoted | 0.000 SBD |
body_length | 218 |
author_reputation | 15,096,938,604,645 |
root_title | "Temel Çizim Komutları - DONUT, ARC(YAY)" |
beneficiaries | [] |
max_accepted_payout | 1,000,000.000 SBD |
percent_steem_dollars | 10,000 |
author_curate_reward | "" |
voter | weight | wgt% | rshares | pct | time |
---|---|---|---|---|---|
hakancelik | 0 | 8,125,506,251 | 100% | ||
coogger | 0 | 12,911,276,408 | 100% |
Benim gibi inşaat mühendisi adayları için vs. çok önemli bir çalışma yapıyorsunuz hocam. Teşekkür ederim :)
post_id | 44,266,061 |
---|---|
author | alperenuzun |
permlink | re-dangerux-autocad-temel-cizim-komutlar-4-20180418t221448572z |
category | coogger |
json_metadata | "{"app": "busy/2.4.0", "community": "busy", "tags": ["coogger"]}" |
created | 2018-04-18 22:14:48 |
last_update | 2018-04-18 22:14:48 |
depth | 1 |
children | 1 |
net_rshares | 0 |
last_payout | 2018-04-25 22:14:48 |
cashout_time | 1969-12-31 23:59:59 |
total_payout_value | 0.000 SBD |
curator_payout_value | 0.000 SBD |
pending_payout_value | 0.000 SBD |
promoted | 0.000 SBD |
body_length | 107 |
author_reputation | 90,041,857,258 |
root_title | "Temel Çizim Komutları - DONUT, ARC(YAY)" |
beneficiaries | [] |
max_accepted_payout | 1,000,000.000 SBD |
percent_steem_dollars | 10,000 |
Ben elimden gelenin en iyisini yapmaya çalışıyorum. Işe yarıyorsa ne güzel... Rica ederim. Kolay gelsin
post_id | 44,313,229 | ||||||
---|---|---|---|---|---|---|---|
author | dangerux | ||||||
permlink | re-alperenuzun-2018419t85538210z | ||||||
category | coogger | ||||||
json_metadata | "{"format": "markdown+html", "app": "esteem/1.6.0", "community": "esteem", "tags": "coogger"}" | ||||||
created | 2018-04-19 05:55:39 | ||||||
last_update | 2018-04-19 06:56:12 | ||||||
depth | 2 | ||||||
children | 0 | ||||||
net_rshares | 581,354,571 | ||||||
last_payout | 2018-04-26 05:55:39 | ||||||
cashout_time | 1969-12-31 23:59:59 | ||||||
total_payout_value | 0.000 SBD | ||||||
curator_payout_value | 0.000 SBD | ||||||
pending_payout_value | 0.000 SBD | ||||||
promoted | 0.000 SBD | ||||||
body_length | 104 | ||||||
author_reputation | 3,186,642,421,786 | ||||||
root_title | "Temel Çizim Komutları - DONUT, ARC(YAY)" | ||||||
beneficiaries |
| ||||||
max_accepted_payout | 1,000,000.000 SBD | ||||||
percent_steem_dollars | 10,000 | ||||||
author_curate_reward | "" |
voter | weight | wgt% | rshares | pct | time |
---|---|---|---|---|---|
alperenuzun | 0 | 581,354,571 | 100% |
Hi! I am a robot. I just upvoted you! I found similar content that readers might be interested in: https://www.scribd.com/document/86873725/autocad-proje-cizim
post_id | 44,573,285 |
---|---|
author | cheetah |
permlink | cheetah-re-dangeruxautocad-temel-cizim-komutlar-4 |
category | coogger |
json_metadata | {} |
created | 2018-04-20 19:59:33 |
last_update | 2018-04-24 21:47:48 |
depth | 1 |
children | 1 |
net_rshares | 0 |
last_payout | 2018-04-27 19:59:33 |
cashout_time | 1969-12-31 23:59:59 |
total_payout_value | 0.000 SBD |
curator_payout_value | 0.000 SBD |
pending_payout_value | 0.000 SBD |
promoted | 0.000 SBD |
body_length | 159 |
author_reputation | 750,854,098,279,735 |
root_title | "Temel Çizim Komutları - DONUT, ARC(YAY)" |
beneficiaries | [] |
max_accepted_payout | 1,000,000.000 SBD |
percent_steem_dollars | 10,000 |
I did not quote it. These are my high school grades.
post_id | 44,794,475 |
---|---|
author | dangerux |
permlink | re-cheetah-cheetah-re-dangeruxautocad-temel-cizim-komutlar-4-20180422t071507918z |
category | coogger |
json_metadata | "{"app": "busy/2.4.0", "community": "busy", "tags": ["coogger"]}" |
created | 2018-04-22 07:15:06 |
last_update | 2018-04-22 07:15:06 |
depth | 2 |
children | 0 |
net_rshares | 0 |
last_payout | 2018-04-29 07:15:06 |
cashout_time | 1969-12-31 23:59:59 |
total_payout_value | 0.000 SBD |
curator_payout_value | 0.000 SBD |
pending_payout_value | 0.000 SBD |
promoted | 0.000 SBD |
body_length | 52 |
author_reputation | 3,186,642,421,786 |
root_title | "Temel Çizim Komutları - DONUT, ARC(YAY)" |
beneficiaries | [] |
max_accepted_payout | 1,000,000.000 SBD |
percent_steem_dollars | 10,000 |