Hello everybody :):):)

Friends, today I want to share with you my new work :)
Knitted socks are not only a part of our clothes, but also care for our loved ones ... they will warm in the cold season and will remind us of our love and care ....

- I tied these socks to Steemit, I hope that I like it ... 

https://pp.userapi.com/c845218/v845218731/3e36c/4WDBH13o9PE.jpg

https://vk.com/images/stickers/3064/128.png

And so for knitting socks you need yarn (any of your choice), five knitting needles ...

https://pp.userapi.com/c834403/v834403450/12cd78/zgl1a9tlldA.jpg

The number of loops is calculated from the circumference of the foot. It is necessary to remove two measures of the foot:

1-st - circle of lifting; centimeter measure the foot from the heel to the rise along the inclined plane.

The 2nd is the leg circumference; measured at the foot, at the thinnest point of the foot, above the bone.

Then determine the average circle: add the circle of lifting and the circumference of the leg and divide the figure by 2.
 For example, the circumference of the rise is 30 cm, the leg circumference is 20 cm; we get 30 + 20 = 50, 50: 2 = 25 cm. At this number of centimeters, we calculate the loop set. It is advisable to round off the resulting number of loops to a number that is divisible by 4, so that it is convenient to knit on 4 spokes. And remember that the knitted fabric has a stretch ..., especially the knitted elastic band ..


We type an even number of loops .... to divide by 4 ....
I dialed 44 loops for a size of 36-37 ... (44: 4 = 11)

Do not forget if your yarn is thick then the number of loops you need to type less .... if the thin is bigger ....

https://pp.userapi.com/c834403/v834403450/12cd82/syHprCymTgo.jpg

This knitting technique gives us a product without a single seam ..., it is knitted in a spiral (in a curved). The socks can be tied in monophonic or multi-colored substituting another color of the yarn and alternating them ...
Socks on five spokes are knitted from above the toe to the toe, circular knitted, four loops are typed into loops, the fifth is an auxiliary (working knitting needle).

We collect the necessary number of loops, distribute them to 4 spokes and knit a rubber band circular viscous.

https://pp.userapi.com/c834403/v834403450/12cd8c/uP8cZ2W-hS8.jpg

https://pp.userapi.com/c834403/v834403450/12cd96/2wr3Wta9XcI.jpg

https://pp.userapi.com/c834403/v834403450/12cda4/IcU4p3u1wRc.jpg

https://pp.userapi.com/c834403/v834403450/12cdae/H5qGE57wHj4.jpg

https://pp.userapi.com/c834403/v834403450/12cdb8/v7VQlrPthPQ.jpg

https://pp.userapi.com/c834403/v834403450/12cdc2/3Yw6q0lRJlk.jpg

https://pp.userapi.com/c834403/v834403450/12cdcc/5Gra5nVXGo8.jpg

I knitted a rubber band at a height of 7.5 cm .. but you can and more or less, this is how you like ....

https://pp.userapi.com/c846322/v846322731/3948d/SInBOgfznKs.jpg

When they tied the elastic we start to knit the heel of the toe .... on one spoke we leave the loops without tying them .... on the remaining three knits we knit 5.5 cm (if more or less, we knit in accordance with the requirement) ....

https://sun1-18.userapi.com/c840728/v840728731/7d538/U2yHAkEe1Lw.jpg

https://pp.userapi.com/c830509/v830509731/eb6d4/_MqvmOSsIng.jpg

For example:
If we only have 44 loops of 11 loops for each spoke ..., on one we do not stick them 44-11 = 33 loops ...., We divide the remainder ..., 33: 3 = 11the knife ...

We begin to knit the toe of the heel ... divide the number of loops into three parts .... We mess the front and middle parts of the loops, the last loop of the middle part we knit the two loops together with the face loop ..., turn the work. Now we knit only the middle part, cutting first and second parts.

https://pp.userapi.com/c845323/v845323731/3ef28/ACVECFHjL84.jpg

https://pp.userapi.com/c834403/v834403450/12cdfe/kKctQpjGLBo.jpg

https://pp.userapi.com/c834403/v834403450/12ce08/0JzAHqOluc0.jpg

The wrong side - we remove the first loop ..., we knit with the wrong loops .., the last loop of our middle of the toe is tied two together with the side loop of the third part .... So we knit to the end of the toe until the middle part of the toe is left on the spoke (11 loops ), and the lateral will be closed .... Next, along the edge of the closed loops of the side, we collect 11 loops and knit again in a spiral (circular) with face loops ..., to the desired length (measure the centimeter of the length of the foot). In the end, we subtract the loops, leaving one centimeter is not tied to the end of the length of the toe.


https://pp.userapi.com/c834403/v834403450/12ce25/UmfHqvEurMA.jpg

https://pp.userapi.com/c834403/v834403450/12ce39/8ps7XEK6vpE.jpg

https://pp.userapi.com/c834403/v834403450/12ce43/R-5sJENUC-E.jpg

https://pp.userapi.com/c834403/v834403450/12ce4d/ZUSjr5VGq7g.jpg

https://pp.userapi.com/c834403/v834403450/12ce61/QZRxlt7_ZK4.jpg

https://pp.userapi.com/c834403/v834403450/12ce6b/cLkGQhgASmA.jpg

https://pp.userapi.com/c834403/v834403450/12ce75/PlkMWNzC118.jpg

https://pp.userapi.com/c834403/v834403450/12ce7f/qETB3_GEEKs.jpg

https://pp.userapi.com/c834403/v834403450/12ce89/gjM_ao7Q8DI.jpg

(the decrease of loops is different)

On the sides of our sock we subtract the loops (starting with the first and fourth knitting needles)
And so, on the first spoke we sew with the facial loops to the middle.
For example :
on the knitting needle 11 loops we sew four facial loops, and we sew the two face loops on the knitting needles, and we knit the two and the slope to the right, then we knit in the spiral to the fourth knitting needle, on the fourth knitting needle repeat the same way as on the first knitting ..., we sew the four loops of the front 5 and 6 loops two together with the inclination to the right ..., continue to knit in a spiral to the first spoke ..., now we sew three hinges of the front 4 and 5, loop the two together with the slope to the right, 6 and 7 loops also two together with the inclination to the right Here we knit 4 loops of two together, so we cut the loops faster, if it requires knitting, then there is a length of a sock) ..., then we knit in a spiral to the fourth spicle and repeat as we did on the first and again we knit in a spiral ... and so we knit until the end of the shortening of the loops ..., the last loop is tightened and the working thread is drawn .. .., the tip of the thread on the toe stretch in the middle of the socks (the wrong side) and fix ...., the second sock is knit similarly ....

https://sun1-4.userapi.com/c840428/v840428353/7f376/v62Hqm9oSBo.jpg

https://pp.userapi.com/c834403/v834403450/12ce9c/BHpzu7XocRg.jpg

https://pp.userapi.com/c834403/v834403450/12cea6/3ZmKQv1L6j0.jpg

https://pp.userapi.com/c834403/v834403450/12ceb0/weKq8EjvMrs.jpg

https://pp.userapi.com/c834403/v834403450/12ceba/KyYmLCeHlzk.jpg

https://pp.userapi.com/c834403/v834403450/12cec4/dsljs18JjRM.jpg

https://pp.userapi.com/c834403/v834403450/12cece/Iahc8lWfZkY.jpg

https://pp.userapi.com/c834403/v834403450/12ced8/kMxORa7QSrc.jpg

https://pp.userapi.com/c834403/v834403450/12cee2/Iu3faEnNhlY.jpg

https://pp.userapi.com/c834403/v834403450/12ceec/0J9xWUzximA.jpg

https://pp.userapi.com/c834403/v834403450/12cef6/PSR5WXUN14A.jpg

https://pp.userapi.com/c834403/v834403450/12cf00/KLBu83xBodg.jpg

https://pp.userapi.com/c834403/v834403450/12cf0a/n334FNvLKEA.jpg

https://pp.userapi.com/c834303/v834303353/128ff4/dKUlwhkBRck.jpg

https://pp.userapi.com/c840326/v840326353/7fe7b/hbA2yXWDtGE.jpg