<div class="text-justify"> 

The air conditioning ducts of the car, like its evaporator (coil used to cool the air) are a place where many microorganisms accumulate, which can be the source of bad odors inside the vehicle and even transmission source of diseases. Therefore, it is necessary that in the maintenance of your car include cleaning

First of all we must remove the pollen filter that has the car in the cabin, for it we must locate the place where it is placed (varies according to the model of car) but all are before the evaporator, so it will be safely close to the glove box , on the passenger side

<br/>
https://steemitimages.com/0x0/https://steemitimages.com/DQmXvH5AAMzxFj5Vjifm23DgpzxrciT4yptsiPE8BNbv3nz/filtro.jpg

<br/>
This filter should be replaced every 6 months, it does not matter if it is not completely dirty, also do not try to wash to reuse it, because it can contain bacteria that can cause diseases, once removed the anti pollen filter we will start with a series of steps to help clean the system where the air we use in the cabin moves

These steps are for people who have little knowledge in the matter, because if you have more advanced knowledge you can directly clean the evaporator with an anti-bacterial product and achieve a better result

To start, we turn on the car and put the system in heating mode, close the air grilles of the vehicle and let it work for 10 minutes, this removes moisture that may exist in the ducts and helps eliminate bacteria
<br/>
https://steemitimages.com/0x0/http://www.sibuscascoche.com/noticias/wp-content/uploads/2016/08/mantener-660x375.jpg

<br/>
After we can buy any antibacterial spray to use it inside the cabin, in this step you should already remove the anti pollen filter, for your convenience it is better to remove the glove box from the vehicle, this is very simple, check your type of glove box, many It comes out with pins under the lid, others with internal pins inside the glove compartment, it's very simple, just look well at the glove box and its shape and there's sure to be a way to remove it from the vehicle

Then the step to follow, is to place the system at maximum cold, wait for it to cool at least 4 minutes, we take the spray and use it directing the flow of the product towards the air intake of the system, when removing the glove box we will see where it is, there we will use the aerosol for at least 40 seconds, avoiding breathing the product, you can use a mask to protect yourself

<br/>
https://steemitimages.com/0x0/https://super.walmart.com.mx/images/product-images/img_large/00750105875279L.jpg

<br/>
After placing the product close the car and leave the air on for 15 minutes, then open all the doors and let work for half an hour

Ready the steps you can place the new pollen filter and so your service is done, this must be done every 6 months to maintain a healthy system free of impurities
-----------
------------
----------
all the images were made with google photos

source of information: own, 15 years of experience in the field

Greetings and good day to all friends of steemit !!

</div>